Gabe’s MAX frame

Posted on May 27th, 2013 by Dave under Bikes, custom bicycles, For Sale, Tandem bicycles, velodrome.
Tags:

Just a quick notation on my “restoration” services. This frame from 1991 was one I’d made for one of the shop’s team riders.  Gabe was/is very hard on his equipment. I don’t recall seeing as many dents in any one frame or fork before.  Of course he explained it away as being this crash or that incident…. here’s a look at it when it arrived a couple days ago..

Well used MAX Porter click on to enlarge-arrow back

The frame was at the bike store hanging in the repair area. I asked about it and the guys said that he wanted to build it up again and ride it as his last “lightweight” (steel-bamboo) had broken in half..  Anyway, not wanting him “out there” on one of my frames that was as beat up as this old race bike, I offered a Bro deal to make it at least presentable again and the “deal” allowed me some discretion in how it would look..  His fork was the worst as it had been laying in the dirt in his back yard for years…

really rusted steerer tube

The fork had been in one of the previously mentioned crashes.. a crit where he’d got off line and sucked a marker cone between the blade and wheel..  I always liked the look of the MAX crown and the fat aero blades though they never fit worth a damn and required excess filler to look half way right. Nevertheless I spent some extra time to make this one safe and functional again..  Here’s a couple after the repair shots.. even still I missed a big ding in the top tube.. maybe a decal will cover it, just like the old PowerBar decal in the first picture..

AH! Signal Green.. like FM pumps..

seat lug

a real pump peg

Well, it is what it is.. probably good for a couple more years hammering from an old guy, but former National jersey winner..

As usual send me your comments and critiques…

 

Comments (0)

More Turquoise

Posted on December 11th, 2012 by Dave under For Sale, Uncategorized.

I had a few hours yesterday to make a ring for my wife’s collection.

Nevada turquoise on Sterling silver ring

the next one is for me...

Comments (0)

Porter porteur

Posted on November 28th, 2012 by Dave under Bikes, custom bicycles, For Sale, Tandem bicycles, velodrome.
Tags:

I got this oldish tube set from Omar at Oasis Bikes in AZ, he’d had it kicking around his shop for nearly ten years I think he said. At any rate his price was fair and I wanted a project and thought it would be well suited to long day rides, commuting and even touring, though I’ll admit I didn’t design it for fenders as originally it was going to be a cross bike… As Dale (CR list serve) alluded to, it has some NM turquoise and some NV Buffalo turquoise and some silver, chrome and polished steel bits to make it stand apart.If anyone wants custom racks, that’s possible too. My dog and a neighbors dog got into a bit of a well, dog fight and now I have some pending expenses I hadn’t planned on and that explains the low pricing. It’s a 1″ steerer if that makes or breaks the deal. The tubes are from Columbus and are the over sized FOCO kit with the unicrown fork and pre-mitered straight blades. It’s sized 57 x 56cm.

FOCO is made from an alloy called “Thermachrome”. It has the interesting and specific characteristic of having the same tensile strength after brazing or welding as before. There are no “hard” spots on the frame. This brings the frame closer to the builder’s ideal of taking the 8 tubes of the frame and uniting them into a single cohesive unit.

Here’s some pictures of the finished bike dolled up with paint and decals. I didn’t get the original Columbus decal from Omar so I just used an old Columbus “special tubes” decal for the job. Enjoy. Click on pics to enlarge..

Pumpkin patch Fondo

Buffalo Turquoise on the stays treatment

Chromed dropouts

Sterling silver and Turquoise head badge

silver wedding bands at the ends of the head tube too..

email me  frogeye@porterscustom.com  Well, I got through the City’s extortion proceedings without this frame, now built up and hanging in a local bike store (Bike Coop) being sold, so the killer deal is gone and it is priced accordingly.

 

Comments (0)

The 2012 Santa Fe Concorso

Posted on October 14th, 2012 by Dave under Bikes, custom bicycles, For Sale, Tandem bicycles, velodrome.

Rogues Galley: Keith, Dave and Chauncey

and again

...and again

Well, I’d be remiss if I didn’t say a few words and show a few pictures of this falls concorso.

This year the bicycles became an official part of the show and were judged by a team of judges, one of which knew a thing or two about bicycles and the others relied on what their parents taught them as kids, I suppose.

I was joined this year by Keith Anderson (OR) and Chauncey Matthews (NM) as current frame builders/painters. The other bikes in the concorso were privately owned collector bikes. They being mostly from the ’80s if I had to make a guess, though there was a very early Swiss Army bike in the mix.

I had fully expected Keith to take the top honors and the very, very cool trophy. I thought this because he had an exquisitely hand made kids bike with modern touches that connected bicycle history with modern technology. Well, I was wrong.

Second place, I thought could go to Keith or Chauncey or me. I was wrong again. Hmmmm.

OK then, third would go to Keith and it did. However, this time it wasn’t because it had new technology, but rather that it was a racing bike from the 80’s with a provenance on the track.

So who was the winner? Well, it was a1990s bike, a Sterling or more apt perhaps, a Bilenky. It was made from a stupidly ultra light Columbus KL tube set and some time was spent filing the lugs into graceful curlycues. It has probably never been ridden for fear of collapsing in on itself.

Second place was a late 90’s Ricard Sachs Campy equipped road bike.  It was an unusual green paint scheme and supposedly never ridden.  Good grief! Put it in a time capsule then..

Chauncey had 2 of his Ride the Divide 29er’s nicely decked out. I think if he had all the bags and bottles and racks and radios for the event on the bike he may have fared better.

I ended up with a Directors Award ribbon for one of my Santa Fe Style Spirit road bikes, as did Keith for his GT40 kids bike. We decided the ribbons were like Miss Congeniality prizes or consolation for just being there.

But the good news is that I took an order for a frame, Keith got an order for a Pinnarello  re-spray and Chauncey, he was just happy to be there and like the rest of us had a really nice day and a bit of a sun burn.

Here’s a shot of the 1st place award for the bicycles. I would really like to win one. It is the stylized bird of prey on the pedestal at the head of the table.. click on the photo to enlarge.

The Awards. Stunning!

 

 

 

Comments (0)

Photo album Santa fe Style

Posted on July 7th, 2012 by Dave under Bikes, For Sale.
Tags: ,

http://imgur.com/a/BIg3A#1

Comments (0)

Losing my mind?

Posted on March 12th, 2012 by Dave under Austin Healey, auto restoration, For Sale.
Tags: ,

 

 

 

 

 

 

 

A very forlorn MG Midget

Note; click on pictures to enlarge. back arrow to return to text.

My insurance agent called a couple weeks ago and told me another client had to be rid of a MG for her mother’s estate.  It was nearly 100 miles away and not even a “B”. The pictures they sent were pretty discouraging and there was no title, but it did have a 1275cc engine and gear box. I gave her $100 for the “parts” and $200 to the tow truck driver (Tom-a good guy) and next had to decide what to do with it. Part it out, build a race car or restore it..

The floors had rusted through or nearly so..

Drivers seat? (click to enlarge)

But as I mentioned it did have the drive train and only 36000 showing on the odometer, which works, but the engine was not original color so its been out and did I mention that the throw out bearing was missing the carbon/graphite face and probably was parked many years ago for that reason.

It all seems to be there.

After several days I have most of the paint off the body and engine compartment. The trunk area is pretty much OK as is.

Dirty job..

Hammered out the tree damage to the rear..

new floor pans, sills and cross members

I glued the new pieces in with a 3M bonding mastic for this purpose. A first for me. I don’t like it. It’s very expensive, requires more prep work and needs 24 hours to fully cure. I still have to repair the bottom edges of  both rear fenders and I’ll just MIG them in as usual. I understand that the insurance co.’s require the glue for new vehicle repair..

Well, as things would have it, I had another glue cartridge and decided to go ahead and use it up.  So here are two methods for gluing repair panels. The small one is probably the superior method. Cut to size, flange the edges, glue and clamp. The inside is wedged against the trunk floor edge with carpenter’s door plumb wooden wedges. In the second photo even though the damaged area was smaller than the first I decided to use the entire patch. Just glue it over the cleaned/prepped substrate and use a bunch of screws to clamp it until it dries, at which time the screws can be removed and the edges feathered with Bondo.

Correct way?

Incorrect way?

Regardless of the technique it will be interesting to see how these repairs weather time. I will admit that the floor and sill repairs seem very robust and I don’t foresee any problems structurally.

I’ve had a few more days to devote to the Spridget.  In the next set of photos I’ve finished with the dent repairs and Bondo phase. I also have coated all non painted and mostly hidden areas with 3M Body Schutz. It’s a rubberized sound deaden-er and sealer. It also serves to give everything a clean uniform look.

Right rear quarter

Body Schutz

Best hood of the 3 on hand..

The 36 grit tends to leave some “marks” so after the 80 and 180 grit sanding I use some glazing to fill any visibly deep gouges, hence the multi-color appearance in this last photo. Next step is to get the body and engine compartment primed for paint..

Of course the more the details are corrected, the more it pushes one to take it to the next level. I have no idea how the “1 day” paint shops can sleep at night knowing how much better a job they might have done. I’m also starting to appreciate why good body shops charge so much money, the price of materials notwithstanding.

Anyway, here it is in primer and awaiting today’s job of blocking. I did 3 coats of primer so I’m going to start with 180 grit to speed the process along. I finish with 400 wet or finer..

 

primed and ready to go?-- NOT!

Rear quarter shot

Still have a lot to do here..

So today I spent 10 hours block sanding every square and curved inch of the project car. I used 180 grit dry since I had applied 3 or more coats of primer before the guide coat and 400 or finer used wet would have been a multi-day affair.  I found some low spots and filled them and I found some high spots and I hammered them, and then I re-shot the repaired or sanded to bare metal areas with another coat of primer and then I re-shot the entire car with a light even coat. Next I’ll do the 400 grit wet and it should go very quickly as it it already flat and straight except at the repaired spots, but they are small and not very numerous. After that step it’s time to consider paint type and color… decisions, decisions… And lastly, but not leastly.. a tip of the hat to my pal Bruce, who volunteered to come over and help with the blocking. Thanks bud!! PS: I’d add more pictures, but it looks just like the ones above.. or nearly so.

Well…… I went and bought all the “stuff” for the base/clear coat.. ah $425 .. I’m quite used to and pretty good shooting good old Imron..  Let me set the stage.. it’s been about 60 degrees at 8 am the past few days but very windy by mid day.. So yesterday I got all the base color laid down and only a couple mishaps that were easily fixed. I usually use a little “repair” gun for bikes and rarely have used my big full qt. cup gun. But after adjusting the fan pattern and the air pressure it went OK. Now I’m told that I have to shoot the clear within 5 hours or I have to wet sand the car again.. OK the wind is still not too bad and all the scurrying about has me warmed up and I’ve not even thought about the ambient temp. The directions say two med-wet coats. OK Well not really, the clear is not flowing out because its too cool outside, if I try to make it wetter it just runs. what a mess, what a waste. Well, I guess a learned a lesson and that won’t happen again. Or I’ll just let the car guys do the painting! here’s a trick I learned after the fact for you DIY outsiders.. Put the paint in the microwave and warm it up first…why didn’t I think of that? I’ve put catalyzed paint in the ice box overnight to slow it down. I’m going to wait until this week of high wind speeds blows through and after a day or two I’ll wet sand it out, being very careful to not go through the color coat! And try it again when the conditions and pressure are better.. Here are my disappointing results..

double click to see how bad... arrow back

More work to do..

re-loaded

Wet sanded/blocked all the orange peel last evening. Actually it wasn’t a bad as I’d expected. It doesn’t have to be perfectly flat as the clear will fill what I’ve left behind. There are tape markers where I went thru to the primer. This morning I’ll go get an adequate amount of a less expensive urethane clear that has a slower flash time. I thought initially that it was the temperature that was the reason it didn’t flow out.. nope, it was setting up too fast.  Good for spot repairs, but not for an overall car shoot.  I’ll get a pint of color and fix those spots. Then I’m going to tarp off an area in the shop to paint it indoors. I have a couple big floor fans that will help. This isn’t the “right” way to paint a car, but it’s a one time deal… till the next one  ;~)   I’m also going to get a small can of reducer for the clear, Just in case I’m wrong about the drying time. Don’t want to sand it again!

The ’60’s circa dash panel arrived yesterday. It has had an extra instrument hole cut in it. I’ll either weld in a patch or add an ammeter or voltmeter… a work versus money decision..

I’m beginning to think this car is jinxed… Spent several hours repairing the dash and the paint went south on that too.. Monday last I had a professional painter friend come over to do the clear coat (I’m tired of messing it up) Well, he didn’t have much better luck. The back half of the car is fine, but the front half has water spots and enough hair and dust to make it in-salvageable. So I’ll sand it down again. This time I’ll just take the front fenders and hood to his shop where hopefully it’s not as dusty or dirty..

close, but no banana

this half I'll mask off and work around

This has gotten out of control as a fun project. I decided to just re-shoot the front half here, but out side again, instead of taking them to the other shop. I may have also decided to leave it as a Midget variant. The Sprite dash is going to be a PITA and requires new larger diameter instruments. Remember I was going to keep the drive train and recycle the rest at the beginning and I’ve already spent too much money just to make it presentable. So today’s result is OK, probably better than the back half now. I did get a couple small runs in the clear, but they will buff out and be just fine..IMHO. Here’s it is pre buffing..

ready to be buffed out finally.

I must say that the painting turned out to be a frustrating addition to a skill set. Most would agree that they want  the best result from their skill level. Well, where does the practitioner say enough is enough or that is not or is good enough. What about the parts and pieces that will be mounted on or adjacent to this shiny new paint? Personally I wanted the paint to look really good so when someone asks “Where’d you have it painted?” I could puff up a bit and say “Why I did it myself in the drive way” The reality is that now I have to spend extra time or extra money on the rest of the rehab to match the quality of the paint work.

Here it is with the fenders finally bolted on and the repaired grille in place and ready for the wiring and plumbing work to commence.. I thought about “making it run” for the first time today. It’s been here for 9 1/2 weeks now and if my real job doesn’t get in the way perhaps it will be on the road in another 2 months.. give-r-take

Some assembly required..

piece by piece

and hour by hour

The head light buckets were total trash in the original car. I spent nearly 6 hours repairing and piecing and polishing up my “cleanest dirty shirt” assortment of parts to get the two I finally installed..

Well, I was running out of things I wanted to do next so I decided it was time to think about getting the engine installed and running. So I moved the power-plant to the other bay and drained the oil as I wanted to drop the pan and inspect the bearings before it went back into the car. I had turned the engine over with the starter motor before it came out to check for compression and ugly noises and it made sorta OK compression (for a car that had sat for 20 years) and I didn’t hear anything bad. Well, you guessed it, after the pan was off I saw the oil pump screen was coated with chewed up bearing material. Yup, number 4 rod was spun. Damn, I hate it when that happens. I think in the interest of time I’ll use an available re-built engine and deal with this one later. It just means more money to spend now, but it will give me a better sales pitch for this right now.  When I had separated the gearbox from the engine I found the carbon facing on the release bearing gone and had assumed that the owner couldn’t put it in gear and had simply parked it for that reason…

missing carbon face on the Throw out bearing

but, here is the real reason it was parked..

#4 rod needs about .020 removed.... sigh

In the meantime, even though I have a miserable summer cold, I have the rest of the dash instruments installed and wired up. The harness I got from my trusty British car parts wholesaler is very close but not quite right for this year of Midget. It’s missing a couple grounds so I’ll get them made up shortly and that should make the dash lights work. Also the seats are back from Jim and Jerry Tanny’s upholstery shop. I can’t bolt them in until the carpet is down.. another semi big job for me.

The good news today is that the rebuilt engine arrived today. It used to belong to a Austin Healey club member in the Chicago area. He was traveling to one of the Healey gatherings on the West Coast and spun a bearing. A local Healey club guy gave him a spare he had and the Chicago guy paid to have this one rebuilt. So it’s just been sitting for a couple years waiting for a new home. I’ll eventually rebuild the one from this car when the urge and sufficient funds move me to do so. Here’s the most recent pictures..  The club guy recalls that the head had been modified. I measured it as best I could without removing it and well, it looks pretty stock to me. It is a later head, that had air injected into the exhaust ports, but no signs of porting or polishing or even much if any removed from the height dimension. I do know that the push rods all hit the rockers off center. I’m not sure if I should be  concerned or if this was purposely done to make the valves rotate more. I checked a couple others I have in the shed and they all seem to be about half this way…. ??

dash and instruments

seats from a '65-ish car

Re-built 1275cc engine"

I’m thinking about painting it gold. British Motor Corporation had a “Gold Seal Replacement” program for their replacement power plants. And they were painted a sort of gold color. I did this once before on one of my Bugeye Sprites and I liked the way it looked and it was always a good story to explain why it wasn’t the “proper” engine color…

Well, I’ve gotten ahead of the story line. An able bodied friend arrived and we dropped the engine/gearbox into the chassis before I took pictures of the gold engine block. Well, you get the idea.  I rebuilt the carbs while the paint was drying. Even after several hours in the carb washing machine still most of the black oxidation was untouched. I gave it my best shot. It won’t affect the operation any, but clean and shiny is often good for another 10MPH ;~)

Gold Seal Replacement?

..and the other side

I got the engine running yesterday. It was a bit disconcerting at first. Though I tried to get some oil pressure just spinning it with the starter I couldn’t get any reading and was worried I might have to pull the engine to see if it had the correct pump (which I’d assumed was done when the engine was rebuilt) I tilted the car, I squirted oil into the oil lines still no pressure. Finally I removed the sender line at the block and it squirted out like a geyser. Turns out the 20 year sleep for the gauge was the problem. I gave it a few sharp taps and it finally started to register. It still sticks so I’ll pull it out and get it serviced.

Though I marked the crank pulley with paint I still couldn’t see the mark to set the ignition timing. So I put it in 4th gear and pushed the car to rotate the engine…. except nothing happened. What now! I checked the gear box before I bolted it up. It was fine, but now no connection with the engine. I’d replaced the pressure plate and clutch disc since the old stuff had the chewed up release bearing. I know I installed the correct release bearing?? What I hadn’t done is any service to the slave cylinder. Well, geeze, no wonder the old release bearing was so worn, the push rod the previous “mechanic” had made was over 2 inches longer than is specified for the 1275 series…

Clutch slave components

In the above picture, the correct push rod is the short one, the bottom most one is what was in there and perpetually holding the clutch in a partially released condition.  I’ll get this re-installed and I hope to have the use of the gearbox afterwards.. I should have done this when it was out but sometimes I can’t get it through my thick skull exactly how stupid some mechanics/owners are…

new seat

This is the only current new picture from this week.. The carpet, panels, and seats are in. waiting for some weird packing pieces to install the top frame and add the new top… I’ll have more soon.. The car is running down the street and sounding good.. Oh yeah, the windshield and side glass is in as well. Now sporting a full tinted windshield…

front quarter w/ rebuilt/repainted wheels

rear quarter shot

OK, now it’s starting to look almost finished, eh? New tires all around and spare too. A few more interior trim items and the new top and I’ll head to DMV for the title hassle I’m sure to encounter..

nearly ready for prime time...

Here it is in pretty finished condition. I’m still awaiting a State VIN inspection so I can get the title work completed and then I can do some legal driving to shake out any problems that may surface..

Snug as a bug

Looking finished at last..whew!

 

Comments (0)

Santa Fe Concorso 2011

Posted on September 27th, 2011 by Dave under Bikes, custom bicycles, For Sale, Tandem bicycles.

This is a fantastic automobile show on par with Pebble Beach or Amelia Island. Of special interest to me this year was the introduction of bicycles in the show.

SF Concorso bicycle display

Though the bikes were not judged this year, the organizers indicated that they would be next year. the bicycle entrants were however each given a Directors Award  ribbon for our time and expense. Of course we were treated to VIP credentials and privileges.

A highlight for me, as I am also an avid sports car owner was a chance to mix it up with Sir Sterling Moss, arguably one of the greatest race car drivers of all time. Here I  have Moss on my left, a D-Type Jaguar and an OSCA MT4 in front of my “54 Austin Healey 100. I won’t mention what our speed was in the photo to protect the innocent.. ;~)

Too much fun!

Here is my “winning” entry:

Me as a happy camper

In addition to my entries there was a Columbia ordinary, a Bates, a Cinelli, and a Guerciotti.

Here is the link to the official Concorso catalog: http://www.santafeconcorso.com/2011_flipbook.html


Comments (0)

Spirit Tandem

Posted on March 18th, 2011 by Dave under Bikes, For Sale, Tandem bicycles.
Tags:

Off to the Santa Fe Concorso

LeMans winner Bob Bondurant and wife Patty at Concorso

Framers and visitors:

Finished and ready for the San Diego bike show… It’s pretty sweet if I may say so myself..

I was in a hurry and took the pictures before I’d properly adjusted the handlebar positions.. so I’ve already been chastised for that..

This is the low trail design that Martin Manning (bike geometry 101) suggested that I try. This falls below the 2″ threshold and I must admit that it feels very light. The idea is that it will be less twitchy at lower speeds but still very stable at higher speeds  due to the team weight (mass).

Haven’t had a stoker on it yet, but due to initial feeling I see no reason for it not to be as predicted. It’s a 74.5 degree head tube if you all are wondering.

OK, if one looks at the pictures you’ll see that the captain’s bars are at the same height as the seat.  I don’t know precisely what the dynamics of this arrangement set up, something akin to over-leverage, Suffice it to say that after I flipped the stem over to a slightly negative rise the oversteering issue disappeared and the tandem handles like a dream.

In respect to the short trail design, I suspect that the major tandem suppliers don’t do this to protect themselves from litigation arising from neophyte owners with little or no tandem experience.

Hope you all approve.. have a great weekend

dave

Click on to enlarge-return arrow to escape

tote that load

sure is green

lotta rake

pretty Turquoise bits

adequate stoker space

Price yet to be determined…

Comments (2)

wHoly Mackeral

Posted on February 15th, 2011 by Dave under Bikes, For Sale, velodrome.
Tags: , ,

I have decided to attend the 2011 San Diego custom bike show as an exhibitor.  My last booth was probably an Interbike in the eighties.  Any way, it was suggested by a few that it would be cool to take a couple of the old  record bikes.. I still have a half dozen of them here in the shop. I dusted this one off yesterday. It’s probably one of the oddest of the bunch, but it did set a record the first day on the track. Oddly the men didn’t like the ideas, but the women did. Don’t ask me.. Carol Anne Bostick rode it to two records on two different dates. see

It is Columbus EL tubing.  Has some sheet metal fairing/gusseting, has a 24″ front wheel (which needs to be cleaned up), it has a gazillion holes through it (which should pique the ire of some on the CR list) and it has an eccentric BB. This last feature was an attempt to make some adjustment in seat tube angles for different riders. It added a lot of weight, but was located well below the axle line, so it added some noticeable stability with a lowered center of gravity. And note the skirts on the fork tips.. This was done after wind tunnel tests showed the air flow went up the blade instead of remaining in a horizontal flow..

Here ya go…

fork detail

still ready to go

with flash enhancement

last one- click on to enlarge pixs

I’ll put this in the running for making the trip.. Perhaps a vote is in order as the showtime nears.. dp

I got the 14 foot ladder out and got his bad boy down off the wall the other day. It was so filthy with dust that I’d forgotten it had a pretty cool fade paint scheme.. This one was used exclusively for track record breaking. The most notable is Kent Bostick’s  100 kilometer record. Like some of the other “record” bikes this record is 20 years unbroken, partly because the UCI has stopped doing a 100K event and second is because riding 60 miles at full bore is a really tough challenge, though the popularity of brevets would indicate otherwise.

Kent’s time is 2 hours, 9 minutes and 11 seconds  about 28 mph average! In comparison the UCI record held by Ole Ritter was 20 minutes slower.. Kent, you the man!

Here’s some pictures:

Time machine

It is Columbus MAX tubes, Cinelli cast BB, Zeus track dropouts, streteched Kevlar disc wheels (supplied by Scott & Vickie Gordon), Shimano drive train (supplied by Shimano-Wayne Stetina, Continental Olympic and Panaracer 26″ front tubulars  and a very early CF seat post. The whole package was 15 pounds.

seat "lug" aera

early aero bars

a pretty handsome "working bike"

This next one is a little different, but one that caused both great angst for me and great satisfaction.

The complete story of the bike is in an earlier blog post if one cares to go back a ways.. I’ll try to link to it before I run out of time tonight. Here:

To make a long story short, this is still after 18+ years the National Tandem TT champ.. and here are some pictures of how it’s set up now for riding with anyone who’s daring enough to trust a half blind captain…

The first green machine

It’s all Columbus MAX tubing except the oval boom and the middle seat stays which are fork blades as I recall.

close quarters for stoker

Adjustable stem reach

I got this from Pino Morroni. It’s part 3TTT and part Pino and is very handy for fitting different riders. Also a stayer brace is added to stiffen the bars, which as tandem riders know can deflect a bit with the mass at hand.

More funky Porter forks..

More choke holes and skirts.. what on Earth was I smoking?

Rear stays, track ends w/ der hanger

I worried that the Max chain stays weren’t up to the job so I added a second set of stays..

Captains seat tube area

Captain's BB and lateral joint

One of the stiffener tubes can be seen in the boom tube. One can click on the photos to enlarge them, then use the “BACK” arrow to return to text..

Stoker's BB and a tangle of tubes

and lastly for those of you curious about the handle bar stem another shot for you..

Pino's handy work..and 3TTT

I’d like to have another of those MAVIC headsets.. a real work horse..

that’s it.. Dave

 

Comments (2)

Used Porter Columbus Spirit frame

Posted on February 10th, 2011 by Dave under Bikes, For Sale.
Tags: , , ,

I had this same frame up for sale several months ago. Unfortunately I knocked it off the hook it was hanging on and bounced it off the fender of a customer’s car fender. Ahh, both were dented…  The frame fared better than the car, but it’s really hard to sell damaged goods. So I stripped the paint, repaired the small dent and polished the dropouts as a bonus.

It’s a 58cm seat to top, 57cm top tube c to c. Seat angle is 73 degrees and the head tube angle is 72 degrees. It weighs a tad over 3lbs and is freshly painted with DuPont Imron slate grey metallic  and clear coated too.  It’s a 27.2 seat post, English threaded BB and 130mm spacing. The Columbus Spirit (shaped) tubes are arguably the most advanced bicycle steel tubing ever offered.  Near the weight of carbon fiber, but the resilient high performance feel only steel can offer.

This was a frame I made for my personal use as a long distance road bike. I’m an old racer at heart and still like the steeper head and seat angles, so it just sat around collecting dust. This should make any discerning collector a really nice bike! It’s an inch and a quarter ID head tube for thread-less fork. I am asking $750.00 and I’ll ship it anywhere in CONUS.

right side-click to enlarge

“Back”  arrow to return to text.

Silver Jack Rabbit & turquoise

Left side

Call me at 505-352-1378  Dave……..

Comments (0)